Austenitic stainless steel alloy 310 (UNS S31000) was created for use in high-temperature, corrosion-resistant applications. Under gently cyclic circumstances, the alloy may withstand oxidation up to 2010oF (1100oC). Alloy 310 can be utilized in mildly carburizing environments and is sulfidation resistant because of its high chromium and moderate nickel concentration. The alloy’s low carbon version is 310S (UNS S31008). It is used because it is simple to manufacture. A high carbon modification called 310H (UNS S31009) was created for improved creep resistance. Most of the time, the plate’s grain size and carbon content can satisfy both the 310S and 310H standards.
Corrosion Resistance Properties
In the majority of in-service situations, Alloy 310S is more resistant to high-temperature corrosion due to its high chromium (25 percent) and silicon (0.6 percent) content. The alloy outperforms the majority of heat-resistant stainless steel in these environments, but it does not perform as well as Alloy 600 (UNS N06600) or Alloy 800 (UNS N08800).
The use of alloy 310S in damp, corrosive environments is not intended. The high carbon content, which is there to improve creep qualities, has a negative impact on the ability to withstand aqueous corrosion. After being exposed to high temperatures for a long time, the alloy is vulnerable to intergranular corrosion. However, Alloy 310S is more corrosion resistant than most heat-resistant alloys due to its high chromium concentration (25 percent).
Applications of 310S Stainless Steel Sheets
- Components for a furnace.
- Exchangers of heat.
- Paper mill machinery.
- Gas turbine exhaust components.
- Jet Engine Components
- Equipment for oil refineries.
Additionally, Stainless Steel 310S Sheets are produced in accordance with the shifting requirements specified by customers. Additionally, Stainless Steel 310S Plates are well known for their durability, cost-effectiveness, and hardness. Because of its higher potency and strength, stainless steel 310 Coils are widely accepted in many industries. Engineering, electricity, and chemical industries all use stainless steel 310S sheets. Because of their perfect surface, simple installation, long-lasting performance, and corrosion resistance, stainless steel 310S plates are frequently utilized.
Hope you found this article resourceful. For more info regarding stainless steel sheets, visit 310s stainless steel sheet manufacturers offering a wide range of stainless steel sheets.
