An isobar or pressure bulb is a stress contour or a line which connects all points below the ground surface at which the vertical pressure is the same. In fact, an isobar is a spatial curved surface and resembles a bulb in shape; this is because the vertical pressure at all points in a horizontal plane at equal radial distances from the load is the same. Thus, the stress isobar is also called the ‘bulb of pressure’ or simply the ‘pressure bulb’. The vertical pressure at each point on the bulb is the same. Pressure at points inside the bulb are greater than that at a point on the surface of the bulb; and pressures at points outside the bulb are smaller than that value. Any number of pressure bulbs may be drawn for any applied load, since each one corresponds to an arbitrarily chosen value of stress. A system of isobars indicates the decrease in stress intensity from the inner to the outer ones and reminds one of an ‘Onion bulb’. Hence the term ‘pressure bulb’. An isobar diagram, consisting of a system of isobars
Plotting Procedure:
The procedure for plotting an isobar is as follows: 1. Let it be required to plot an isobar for which per unit area (10% isobar). Stress distribution is given by formula:
where,
2. Assuming various values for z, the corresponding KB-values are computed. 3. For the computed values of KB, the corresponding r/z-values are obtained. 4. For the assumed values of z, r-values can be calculated. It is obvious that, for the same value of r on any side of the z-axis, or line of action of the point load, the value of is the same; hence the isobar is symmetrical with respect to this axis. So, the other half can be drawn from symmetry. When r= 0, KB= 0.4775; the isobar crosses the line of action of the load at a depth of:
Get more information on Plotting Procedure at GATE Online Coaching
Depth z (units) Influence coefficients KB r/z r (units)
0.5 0.0250 1.501 0.750 0.1Q
1.0 0.1000 0.932 0.932 0.1Q
1.5 0.2550 0.593 0.890 0.1Q
2.0 0.4000 0.271 0.542 0.1Q
2.185 0.4775 0 0 0.1Q
IMPORTANCE OF PRESSURE BULB IN PRACTICAL
The Zone in a loaded soil mass bounded by any arbitrary isobar is known as a pressure bulbHow to Choose Your Wedding Songs in 2022?. The vertical pressure at any point on the surface of the it is the same.
A stress line below the ground surface which connects all the points at which vertical stress is equal is called an isobar. it is a curved surface which resembles as bulb , due to the vertical pressure at all the points below the ground surface in the horizontal plane
Get more information by experts at Online Coaching for PSU Exams