Are you interested in learning how to pole fish? This article will teach you all you need to know about how to begin pole fishing. I will walk you through simple stages from start to end, starting with how to set up your new pole. How to elasticate your pole, knot your first pole rig, a few basic baits, and how to capture more fish on the pole!
How to set up your new pole?
When setting up a fishing pole, there are essential factors to keep in mind. Before you begin, inspect the float for any damage, e.g. the eye or the point where the stem meets the body. Using three float rubbers on the stem, attach the float to the main rig line. The additional tube aids the floating’s grasp on the line. Now, on the line, place 2/3 of the No10 dropper shot. It’s better, to begin with, the droppers and gradually increase the weight.
How to elasticate it?
Elastic is necessary to ease the impact of a struggling fish on a pole. When matching bush sizes, always choose a slightly bigger bush than your elastic. When the diameters of the bush and the pole are equal, cut the bung to fit the bottom of the pole a little at a time until it fits. Thread your pole through it. Pull the elastic through the puller’s bung. Slide a bead onto the elastic and secure it in place. Cut the free ends off and tie a loop in the elastic to prevent anything from pulling through.
Connect your elastic with a connection. Make a knot with your elastic, lasso your connector against it, and then press the bead down. Pull a big amount of elastic out of your pole immediately before you start fishing to soften it up.
Knot your first pole
On pole rigs, a short hook link of 4-6 inches is typically tied with a line diameter. Hook lengths are viewed as a weak link that will eventually give way. Push the float up the line once it’s correctly loaded, then push the shot up and away from the damaged line, ensuring the mono is damp.
Determine the length of line you want to use with the tape measure. Make a loop in the line after cutting it. Make a little loop at the bottom of the rig and drop the first dropper shot close to the knot, followed by the second dropper shot six inches above it. Push the float up the line to within 12 inches of the hook link by sliding the bulk slightly beyond half distance between the float and hook link.
Few Basic baits and how to capture more fish
The project’s major goal is to capture more fish. Baiting a fishing pole with the right kinds of living or non-living items will help you catch more fish. Considering what the fish loves to eat. The most basic baits are live creatures like worms and minnows. Living baits attract fish with color and scent. Soft shells, honeybee comb and leeches can also be utilized, depending on your preference and the availability of the baiting material.
For more informative blog read from www.setuppost.com
Also Read – How to Choose best fishing rod?
